How to repair my washing machine does not drain or squeeze?
If water pipes are still not fine machine or clear discharge, then check the lid is closed properly, or not. When closed, the lid switch emits cries click. Without a click, the lid switch may need to be replaced. This switch is used to connect electrical circuits or closed when you close the lid. It may be loose, broken or jammed by dirt stick. Follow manufacturer's instructions when replacing any parts.
Washing machine does not drain water without the water. Check whether the pipe clogged up drainage water do not. If the pipe is screwed, try clear it straight back. Otherwise, you can replace other piping.
Check the outlet of the machine. Too dirty filter outlet is also a washing machine does not cause flushing. How to handle the outlet opening in the bottom, remove the filter for cleaning.
If all the above steps have not done for a washing machine drain or squeeze it's time to call the professional air-conditioner repairman. Use tools to mount your components have panels removed in the back and push the washer back into place.
Broken or loose belts also prevent washer extractor or exhaust. You try to pull the washing machine out of the wall, use a screwdriver to remove the back plate. Use a flashlight to inspect visually watch straps are not loose or broken. Replace any belts that are loose or broken.Replace washing machine belt is difficult, it is best you call professional washing machine repairman.
Another possibility to express my washing machine drain pump is due. When the back plate is still open, please check electrical pump design to ensure the electric pump. If the power washer and then you start the machine and listen to see if the pump is still running but no water escaped.Able to pump you need to remove and clean it or replace new pump. Once you replace the pump, turn on the washing machine operations to determine exhaust extractor machines are not.
WASHER INACTIVE:
- Check the power supply to the machine is not loose or broken.
- Due to faulty electronic circuit boards does not work.
WASHER REPAIR WITHOUT WASHING:
- As touching or washing motor fire: Wrap the new or replacement motor.
- Due to faulty electronic circuit boards: Fix the electronic circuit boards or replace a new motherboard.
- Because the clutch (spindle) bearings damaged, jammed key: key change means the new bearings.
- Due to water pressure or float tube with holes: find a place to fix leaky pipes or other pressure float instead.
- As the water level in the machine too weak: weak or hate water filter in the water supply valve.
- Due culoa loose wires or broken: adjust or replace wire rope culoa culoa.
WASHING MACHINE REPAIR: WASHING MAJOR
- Because washing motor touches: Wrap the new or replacement motor.
- Due culoa loose wire: wire up culoa corrected.
- Because motor capa touching or washing line: replace other capa.
NO CLEAN WASHER
- Due to the amount of water in the bucket when washing the clothes at the back too much: Align the water and the clothes.
- Due cage and chassis too dirty laundry: cleaning the barrel and drum machines.
- Clothing after washing soap still finished:
- Because the water is too weak to push the soap out of the soap drawer.
- Since the washing machine one way.
WASHER REPAIR 1-WAY
- Due touch washing motor, coil breaks 1: wrap the motor or replace the new motor.
- Due to faulty electronic board only one way to power wash, repair electronics boards.
- Due to damage to the clutch bearings one way: instead of the other way bearings 1.
NO WASHER DRYER (dried plants)
- Due to local clothing twisted at an angle to put the drying machine error:
- Since the washing machine one way.
- Due to the faulty centrifugal (rotary drum drying drag).
- Because barrel cleaning skewed: the barrel room calibration.
- Because the clutch is stuck not go: core changes means the new bearings.
- Do not flush motor activity or flux salamander; rather different motor discharge.
Cried washer T0
- As a foreign substance in the cleaning tank: take out foreign objects.
- Because the computers are stand firm suspension springs, rubber shell casing Loxo: find the remedy damage.
- Due to the crash damaged clutch bearings.
- Due to damage to motor bearings cleaning, liquid core: core changes means new bearings.
NO AMENDMENT TO WATER WASHER
- Check the water or treated water into the water locked.
- Due to broken water valve coil: other countries valve replacement.
- Due to electronic power supply board for the water valve operations: repair electronic boards.
CORRECTION CIRCUIT WITHOUT WATER WASHER
Due to the water valve is closed residue: the toilet water valve.
WASHER REPAIR NO DISCHARGE
- Because the motor is flush discharge or fire salamander: replace another motor.
- Due to electronic power supply board for motor discharge: electronic board repair.
Runny WASHER
- Because phosphorus discharge residue was closed: the septic toilet flushing.
- Because leaky discharge pipe: find a place to fix leaky.
For University of Pakistan Study Material Sharing, Discussion, etc, Come and join us at http://4e542a34.linkbucks.com
You received this message because you are subscribed to the Google
Groups "Study" group.
To post to this group, send email to http://ca13054d.tinylinks.co
For more options, visit this group at
http://004bbb67.any.gs
No comments:
Post a Comment